24 hour

Use the 24 hour service policy for jobs that must be printed 24 hours after they arrive in the system.
Property Value Description
Adjust for no-service periods No Ricoh ProcessDirector does not adjust planned checkpoint times to skip over no-service periods.
Adjustment method None Ricoh ProcessDirector does not adjust the default checkpoint start time, which is the time a job arrives in the system.
Deadline calculation method Elapsed time The method that Ricoh ProcessDirector uses to calculate the SLA deadline for jobs that use this service policy.
Interval [Receive]   No checkpoint is defined for the Receive phase.
Interval [Prepare] 8 hours A job is expected to complete the Prepare phase in 8 hours from the checkpoint start time.
Interval [Print] 1 day A job is expected to complete the Print phase in 1 day (24 hours) from the checkpoint start time.
Interval [Complete]   No checkpoint is defined for the Complete phase.
Number of days   If the deadline calculation method is Specific time, specifies the number of days from the Checkpoint start time until the SLA deadline for a job.
Reset on reprocess Yes Ricoh ProcessDirector records new actual checkpoint times when you select the Print Again or Process Again action.
Service policy description Print in 24 hours from the time a job arrives. Describes the performance commitment.
SLA duration   If the deadline calculation method is Elapsed time, specifies the amount of time allowed, in minutes, hours, or days, between the Checkpoint start time of a job and the SLA deadline.
SLA target time   If the deadline calculation method is Specific time, specifies the time of day for the SLA deadline.
Start time   No start time is specified.
Time zone (GMT+00:00) GMT The time zone.

You can change the phase names to match the functions that you do in that phase better.
 
Copyright © 2006, 2018