Duplex Definition Work Sheet

Record your configuration choices on this work sheet, and give a copy of the completed form to the Customer Support Specialist when the printer is being installed. See Setting Printer Definition Values for detailed information about each item.

Table 56. Duplex configuration work sheet
Item Available Values Selected Values
Duplex Simplex
Printer 1 Printer 2
Printer Definition -> Print Quality
Printer 1 Contrast 1 to 7
Printer 2 Contrast 1 to 7
Printer 1 Boldness 0 to 100
Printer 2 Boldness 0 to 100
Printer 1 Preheat Temperature 1 to 100
Printer 2 Preheat Temperature 1 to 100
Printer 1 Fuser Temperature 1 to 100
Printer 2 Fuser Temperature 1 to 100
Printer 1 Oil Rate 1 to 100
Printer 2 Oil Rate 1 to 100
Printer 1 Oil Belt 2 to 100
Printer 2 Oil Belt 2 to 100
Example Settings Medium / Heavy
Printer Definition -> Print Quality -> Advanced
Printer 1 Use Backup Idler Roll Yes / No
Printer 2 Use Backup Idler Roll Yes / No
Printer 1 Preheat Offset -100 to 20
Printer 2 Preheat Offset -100 to 20
Printer Definition -> Printer -> Basic
Printer Mode Duplex / Simplex
Printer Speed High/Low
Side 2 Verify Enable / Disable N/A N/A N/A
Front Sheet Sequence (Duplex mode only)
  • Front First
  • Front Second
N/A N/A
Same Side Printing Yes / No
Eject to Front Facing
  • Enabled
  • Disabled
Auto NPRO at EOF Yes / No
Language
  • English
  • Spanish
  • German
  • Japanese Kanji
  • French
  • Italian
  • Brazilian Portuguese
  • Simplified Chinese
  • Traditional Chinese
  • Korean
  • Russian
Keyboard Language
  • English
  • Spanish
  • German
  • Japanese Kanji
  • French
  • Italian
  • Brazilian Portuguese
  • Simplified Chinese
  • Traditional Chinese
  • Korean
  • Russian
Printer Definition -> Printer -> Setup
MICR Installed
  • None
  • Printer 1
  • Printer 2
Jam Recovery Point Distance 0 to 700 inches
Print 1 to Printer 2 Distance
(Duplex mode only)
150 to 800 inches N/A N/A
NPRO Length 0 to 1200 inches
Fuser Sleep Timeout
  • None
  • 1 Hour
  • 2 Hours
  • 4 Hours
Clear Memory for Security Yes / No
Audible Alarm Yes / No
Auto Align Yes / No
Contact Text entry field - up to 80 alphanumeric characters
Printer Name Text entry field - up to 80 alphanumeric characters
Engine 1 Name Text entry field - up to 80 alphanumeric characters
Engine 2 Name Text entry field - up to 80 alphanumeric characters
Printer Location Text entry field - up to 80 alphanumeric characters
Support Address Name Text entry field - up to 80 alphanumeric characters
Support Address URL Text entry field - up to 255 alphanumeric characters
Printer Definition -> Printer -> Setup -> Advanced
Stop on Toner Low Yes / No
Open Clear Buffers Alert Yes / No
Dual Sensor Installed Yes / No
Required Log Entry Timeout
  • Disabled
  • 1 minute
  • 2 minutes
  • 4 minutes
  • 15 minutes
  • 30 minutes
N/A N/A N/A
Printer Definition -> Printer -> Date/Time
Date and Time yyyy=year, mm=month, dd=day, hh=hour, mm=minute, ss=seconds N/A N/A N/A
Time Zone N/A N/A N/A
Time Zone N/A N/A N/A
Time Source Manual / Specific Network Server / Any Network Server N/A N/A N/A
Printer Definition -> Printer -> Resource Utilization (Service)
IPDS Font Usage
  • High
  • Medium
  • Low
IPDS Page Segment Usage
  • Unlimited (Disk)
  • High (RAM)
  • Medium (RAM)
  • Low (RAM)
IPDS Overlay Usage
  • High
  • Medium
  • Low
  • None
IPDS Input Buffer Size
  • Low
  • Medium
  • High
Output Buffer Size
  • Low
  • Medium
  • High
Printer Definition -> PDL -> IPDS
Cut Sheet Emulation
  • None
  • Normal Left-to-Right
  • Normal Right-to-Left
  • Inverted Left-to-Right
  • Inverted Right-to-Left
IPDS Printhead Resolution
  • 480
  • 600

The values available depend on the model of the printer.

To have a selectable IPDS resolution, select 600.

IPDS Resolution
  • Automatic
  • 240
  • 300
  • 600

The values available depend on the model of the printer and the printhead resolution selected.

Reprint Pages After Jams
  • Yes
  • No recovery for MICR pages
  • No
Logical Page Increment 0 to 20 pels
3130 Bar Code Emulation Yes / No
Simulate Color with Gray Yes / No
Single-Byte Font Smoothing Yes / No
Double-Byte Font Smoothing Yes / No
Suppress Off Page Errors 0 to 100 Pels
Scale GOCA Lines Yes / No
Printer Definition -> Network -> Attachments -> Channels -> ESCON
Adapter Cards
  • ESCON Link A
  • ESCON Link B
Device Address X'00' to X'FF' (Hexadecimal notation)
Multi-Host Environment Flag
  • True
  • False
Maximum Block Length
  • 32K
  • 64K
Priority 1 to 10
Printer Definition -> Network -> Attachments -> Channels -> FICON
Adapter Cards
  • FICON Link A
  • FICON Link B
Device Address X'00' to X'FF' (Hexadecimal notation)
Multi-Host Environment Flag
  • True
  • False
Maximum Block Length
  • 32K
  • 64K
Media Speed (FICON Link A)
  • Autonegotiate
  • 1 Gigabit
  • 2 Gigabits
Media Speed FICON Link B
  • Autonegotiate
  • 1 Gigabit
  • 2 Gigabits
Priority 1 to 10
Printer Definition -> Network -> Attachments -> Ethernet Adapters -> Ethernet Copper Integrated #1
DHCP Addressing On / Off
DHCP Plug-and-Play Enable / Disable
DHCP Time Out 1 to 300
IP Address X.X.X.X where X <= 255
Subnet Mask X.X.X.X where X <= 255
Internet Name of Local Host
IP Address of Primary and Secondary DNS server X.X.X.X where X <= 255
Media Speed
  • Auto Negotiation
  • 10 Half Duplex
  • 10 Full Duplex
  • 100 Half Duplex
  • 100 Full Duplex
Default Gateway Address X.X.X.X where X <= 255
Domain Name of Local Host X.X.X.X where X is an alphanumeric character
Printer Definition -> Network -> Attachments -> Ethernet Adapters -> Ethernet Copper NIC
DHCP Addressing On / Off
DHCP Plug-and-Play Enable / Disable
DHCP Time Out 1 to 300
IP Address X.X.X.X where X <= 255
Subnet Mask X.X.X.X where X <= 255
Internet Name of Local Host
IP Address of Primary and Secondary DNS server X.X.X.X where X <= 255
Media Speed
  • Auto Negotiation
  • 10 Half Duplex
  • 10 Full Duplex
  • 100 Half Duplex
  • 100 Full Duplex
Default Gateway Address X.X.X.X where X <= 255
Domain Name of Local Host X.X.X.X where X is an alphanumeric character
Printer Definition -> Network -> Attachments -> Ethernet Adapters -> Ethernet Fiber NIC
DHCP Addressing On / Off
DHCP Plug-and-Play Enable / Disable
DHCP Time Out 1 to 300
IP Address X.X.X.X where X <= 255
Subnet Mask X.X.X.X where X <= 255
Internet Name of Local Host
IP Address of Primary and Secondary DNS server X.X.X.X where X <= 255
Media Speed
  • Auto Negotiation
  • 10 Half Duplex
  • 10 Full Duplex
  • 100 Half Duplex
  • 100 Full Duplex
Default Gateway Address X.X.X.X where X <= 255
Domain Name of Local Host X.X.X.X where X is an alphanumeric character
Printer Definition -> Network -> Attachments -> Ethernet Adapters -> Ethernet Copper Integrated #2
DHCP Addressing Not supported on the service adapter.
DHCP Plug-and-Play Not supported on the service adapter.
DHCP Time Out Not supported on the service adapter.
IP Address X.X.X.X where X <= 255
Subnet Mask X.X.X.X where X <= 255
Internet Name of Local Host Not supported on the service adapter.
IP Address of Primary and Secondary DNS server Not supported on the service adapter.
Media Speed
  • Auto Negotiation
  • 10 Half Duplex
  • 10 Full Duplex
  • 100 Half Duplex
  • 100 Full Duplex
Default Gateway Address X.X.X.X where X <= 255
Domain Name of Local Host X.X.X.X where X is an alphanumeric character
Printer Definition -> Network -> Attachments -> Ethernet Protocols -> IPDS TCP
TCP Port 5001 to 65535
Data Timeout 0 to 300 seconds
Priority 1 to 10
Printer Definition -> Network -> Attachments -> Ethernet Protocols -> FTP (Service)
Data Timeout 0 to 300 seconds
Printer Definition -> Network -> Attachments -> Ethernet Protocols -> Push Print (Service)
Data Timeout 0 to 300 seconds
Printer Definition -> Network -> Remote Access -> SNMP
SNMP Agent Enabled
  • Yes
  • No
Match Printer 1
Allow to Configure Printer
  • Yes
  • No
Match Printer 1
SNMP Trap Host X.X.X.X where X <= 255 Match Printer 1
SNMP Community Name Alphanumeric characters Match Printer 1
Printer Definition -> Network -> Remote Access -> Online Access (Web Pages)
Online Access (Web Pages)
  • Yes
  • No
Match Printer 1
Printer Definition -> Network -> Remote Access -> E-mail
E-mail Enabled
  • Yes
  • No
Match Printer 1
Printer Supplies E-mail address Text entry field Match Printer 1
Printer Problems E-mail address Text entry field Match Printer 1
Printer Service E-mail address Text entry field Match Printer 1
Default Trace E-mail Destination Text entry field Match Printer 1
SMTP Mail Server Hostname or IP Address Alphanumeric for hostname or dotted decimal for IP address (X.X.X.X where X <= 255) Match Printer 1
SMTP Timeout 0 to 999 Match Printer 1
Printer Definition -> Network -> Remote Access -> Telnet 3270
Telnet 3270 Enabled
  • Yes
  • No
Telnet 3270 Hostname or IP Address Alphanumeric for hostname or dotted decimal for IP address (X.X.X.X where X <= 255)
Printer Definition -> Network -> Remote Access -> Telnet 5250
Telnet 5250 Enabled
  • Yes
  • No
Telnet 5250 Hostname or IP Address Alphanumeric for hostname or dotted decimal for IP address (X.X.X.X where X <= 255)
Printer Definition -> Network -> Remote Access -> InfoPrint Process Director (IPPD)
IPPD Enabled
  • Yes
  • No
URL for IPPD Application Text entry field - up to 255 alphanumeric characters
Printer Definition -> Network -> Remote Access -> MRPD
MRPD Automatic FTP Transfer Enabled
  • Yes
  • No
Printer Definition -> Network -> Restricted Access
Print Jobs
  • Restricted
  • Unrestricted
SNMP
  • Restricted
  • Unrestricted
Online Access (Web Pages)
  • Restricted
  • Unrestricted
Productivity Tracking Feature
  • Restricted
  • Unrestricted
Ranges
  • Inactive
  • Active
Printer Definition -> Pre/Postprocessing
New Device Name 1-12 alphanumeric characters (including spaces)
New Device Type
  • Coupled Preprocessor
  • Coupled Postprocessor
  • Advanced Postprocessor - MICR
  • Advanced Postprocessor - Bar Code Checking
  • UP3I Sequences
Printer Definition -> Pre/Postprocessing -> Postprocessing Options
Use Internal Stacker Yes / No
Offsetter Enabled Yes / No
BTS Enabled Yes / No
Offset on Mark Forms Yes / No
Printer Definition -> Pre/Postprocessing -> UP3I Devices
UP3I Device Name
Distance