Physical Planning Work Sheet

The physical planner:

Use Table 55 as a work sheet when preparing the site for the printer.

Table 55. InfoPrint 4100 Models MS1, HS2, HS3, MD1/2, HD3/4, HD5/6, TS1, TS2, TD1/2, and TD3/4 physical planning work sheet
Weeks before Delivery Task Assigned to: Scheduled Completion Date:
15
  1. Identify the location for the printer and arrange for any necessary changes to the site.
  2. Identify a delivery route to the location of the printer.
  3. Prepare a layout plan.
  4. Determine the requirements for electrical outlets. If you are installing a Air Bearing Buffer Flipper or an InfoPrint 4100 HS3 and HD5/6, you will need additional outlets. See Power Outlet and Cable Summary for more information.
  5. Order the ‘H’ configuration unique items, such as the turnbar/flipper and adapter piece.
 

___________

___________

___________

___________

___________

 

___________

___________

___________

___________

___________

10
  1. Install and test the electrical wiring and outlets.
  2. Verify that a forklift and operator will be available when the printer arrives.
 

___________

 

___________

 

___________

 

___________

4
  1. Order additional electrical service if required.
    Note:
    Note that the maximum load for low-voltage 60 Hz machines is 55 Amps. Customer circuits must have sufficient rating to comply with local electrical code.
 

___________

 

___________

 

___________

 

___________

Arrival
  1. Unpack the printer and inspect it for external damage.
  2. Move the printer to the prepared site.
 

___________

 

___________

 

___________

 

___________