Copying Snapshots between InfoPrint Controllers

Do this procedure to copy Snapshots from one InfoPrint Controller to another:

  1. Plug the USB flash memory device into the InfoPrint Controller keyboard.
  2. Select Maintenance -> Backup and Recovery to display the Backup and Recovery panel.
  3. Select Create Backup to copy the Snapshots file (config.bak) to the USB flash memory device.
  4. Remove the USB flash memory device from the printer keyboard and move to the printer where you want to copy the Snapshots.
  5. Plug the USB flash memory device into the keyboard on the second printer.
  6. Select Maintenance -> Backup and Recovery to display the Backup and Recovery panel.
  7. Select Load Configuration.
  8. Do the following to load the Snapshots file from the USB flash memory device to the control unit:
    1. Select Snapshots on the window that lists items to read from the recovery USB flash memory device.
    2. Select OK.
      Note:
      Select Summary to see a list of Snapshots currently on the printer.
    3. On the resulting window, you can select whether to add only unique Snapshots, replace all Snapshots, or add unique Snapshots and replace Snapshots that are not unique.
      Note:
      If you select Replace all snapshots or Add unique plus replace non-unique snapshots, the Snapshots on the USB flash memory device will overlay Snapshots that have the same name on the printer. Default Snapshots provided with the printer cannot be overlaid or deleted.
    4. Select OK.
      Note:
      Select Summary to see a list of Snapshots currently on the printer.