Options for Simplex and Duplex Models

InfoPrint 4100 models can have up to four pre/postprocessing device interfaces per engine. Port 1 in each printer has an interface adaptor installed as a standard feature that may used either for a preprocessing or postprocessing device (hereafter called Pre/Post).

Up to three additional optional Pre/Post device interface adaptors may be installed in Ports 2, 3, and 4 of each printer. Allowable combinations for each printer are shown in Table 45.

Note:
The Forms Identification feature (FC 4464) uses a port in Printer 1 and could use an additional port in Printer 2 if you are printing in dual simplex mode.
Table 45. Preprocessing/postprocessing interface options
Port Configuration Options
1 Pre/Post Pre/Post Pre/Post Pre/Post
2 -- Pre/Post Pre/post Pre/post
3 -- -- Pre/Post Pre/Post
4 -- -- -- Pre/Post