Physical Dimensions

Approximate dimensions of the printer frames and control units are shown in Table 28 and Table 29. Approximate dimensions of the Buffer/Flipper Units are shown in Table 29.

Table 28. Approximate frame physical dimensions and weights uncrated for the InfoPrint 4100 Models MS1, HS2, HS3, MD1/2, HD3/4, HD5/6, TS1, TS2, TD1/2, and TD3/4
Dimension All Print Engine Models (per Engine) Printer 1 Control Unit Printer 2 Control Unit1
Depth2 990 mm (39 in.) 990 mm (39 in.) 990 mm (39 in.)
Height 1550 mm (61 in.) 1550 mm (61 in.) 1550 mm (61 in.)
Length 1905 mm (75 in.) 789 mm (31 in.) 789 mm (31 in.)
Weight 1023 kg (2250 lb) 227 kg (500 lb) 249 kg (550 lb)3
Notes:
  1. Simplex or printer 2 in a duplex system.
  2. The printer is wider than a standard doorway.
  3. Including the weight of the printer controller.
  4. Floor loading is estimated to be approximately 105 lbs/sq. in. (average) distributed across the seven feet under the engine section and approximately 40 lbs./sq. in. (average) under the control unit section.
Table 29. Approximate frame physical dimensions and weights uncrated for the Buffer/Flipper Units
Dimension Tall Buffer/Flipper Air Bearing Buffer/Flipper Unit
Depth 635 mm (25 in.) 832 mm (32.75 in.)
Height 1600 mm (64 in.) 1245 mm (49 in.)
Length 279 mm (11 in.) 489 mm (19.25 in.)
Weight 32 kg (70 lb.) 145 kg (320 lb.)
Table 30. Printer frame physical dimensions when crated1
Dimension Simplex Models Duplex Models
Depth 1181 mm (46.5 in.) 1181 mm (46.5 in.)
Height 1791 mm (70.5 in.) 1791 mm (70.5 in.)
Length 2032 mm (80.0 in.) 2032 mm (80.0 in.)
Weight 1149 kg (2533 lb) 1149 kg (2533 lb)