Switching from Duplex to Dual Simplex mode

Note:
Do not change the print mode in combination with any other configuration changes. It must be done separately. Make other configuration changes after the printer is in the correct print mode.

Procedure:

Do this procedure to switch the printer mode from Duplex to Dual Simplex mode.

  1. On the Main touch panel, select Stop to stop the printer.
  2. On the Main touch panel, select Printer Definition -> Printer -> Basic.
  3. Select Simplex for Printer Mode.
  4. Select OK.
  5. Restart the printer, if instructions to do so are given after selecting OK.
    Note:
    The changes you have made won't take effect until you have restarted the printer. If you make other configuration changes they only apply to the mode you were in before you changed.
  6. Remove any forms still in the printer.
  7. Load paper and load Snapshots in both printers for Dual Simplex operation.
  8. Select Start.
    caution 85