Restarting the system

Do this procedure when:

Note:
In duplex mode, this procedure applies to both printers. In dual simplex mode, this procedure applies to the target printer only.

Procedure:

Do this procedure to restart the system.

  1. On the Main touch panel, select Shutdown.
  2. On the Shutdown panel, select Restart and OK.
    Note:
    If you are restarting the system and are logged into the system at a higher level than the default access level, you can log back in at that same level. Select the check box next to Retain Access Level. If you select Shutdown, you cannot select the check box.

Retry the operation that was in progress when the restart was requested.