Using the InfoPrint Manager Operations feature

Once this feature is installed and enabled, the InfoPrint Manager button will display on the Frequent Tasks panel and you can start the Operations GUI.

Do this procedure to start the InfoPrint Manager Operations feature from the Main touch panel.

Procedure:

  1. Select Frequent Tasks -> InfoPrint Manger to display the Frequent Tasks panel.
  2. Select InfoPrint Manager.
  3. At the top of the Main touch panel, select the Logon button to display the Logon window.
  4. In the Logon window, enter the following to log onto the AIX server where InfoPrint Manager is installed:
  5. Select OK to display the Operations GUI. The Operations GUI displays on the printer console, overlaying the operator console. You can use the printer console panels and the GUI at the same time by toggling between them using the Alt-Tab keys. You should use the keyboard rather than the touch panel when selecting actions in the GUI.

    To close the Operations GUI, select the - button in the upper left-hand corner of the GUI window and then select Close from the drop-down list. Closing the GUI on the printer console also closes the program on the AIX server.