Defining a form bar code for a new Snapshot

Do this procedure to define a form bar code for a new Snapshot.

Procedure:

  1. Select the Form Settings panel (Forms -> Form Settings).
  2. Enter a four-character hexadecimal value from 0000 to FFFF in the Form Bar Code field. This hexadecimal number must match the binary code for the preprinted bar code.

    This value must match the value of the bar code printed on the form you are defining. If you enter 0000, you are "turning off" (disabling) bar code checking. The printer will not look for a bar code when the form is being loaded.

  3. Make sure that all printer settings are set the way you want them to be saved.
  4. Select the Snapshots panel (Frequent Tasks -> Snapshots).
  5. Select Save current settings as... and enter a name for the new Snapshot.
  6. Select OK.
  7. Select Close to return to the Main panel.