Using the Dual Toner Mark/Side Verify sensor for same side printing

Do this procedure to configure the printer to use the Dual Toner Mark/Side Verify sensor when printing data on the same side of the page in both printers. The side 1/side 2 verification function verifies that data is printed in the correct page sequence by both printers. When this sensor is used for same side printing, it must be installed in Printer 2.

The Dual Toner Mark/Side Verify sensor is also used to read Top of Form registration marks when printing in Duplex mode. See Using the Dual Toner Mark/Side Verify sensor in Duplex mode for more information.

Note:
Before you can perform this procedure, the Dual Toner Mark/Side Verify Sensor feature (Feature Code 4570/9570) must be installed and enabled by your service personnel.

Procedure:

  1. Ensure that the printer is set to print in Duplex mode:
    1. Select Printer -> Basic to display the Printer - Basic panel.
    2. In the Printer Mode field, select Duplex.
    3. Select OK to save your changes.
  2. Select Printer Defnintion -> Printer -> Basic to display the Printer - Basic panel.
  3. Select Side 2 Verify.
    Note:
    This field is displayed only if the Side 2 Verify Disable feature (RPQ 8B4282) is installed. Your service representative must install this feature.
  4. Select Same Side Printing.
  5. Select either Yes for duplex data or Yes for color.
  6. Select OK to save your changes.