Using the Dual Toner Mark/Side Verify Sensor (FC 4570/9570)

The Dual Toner Mark/Side Verify Sensor feature (Feature Code 4570/9570) must be installed and enabled to use this feature. Your service representative must install all special features.

This feature provides a Dual Toner Mark/Side Verify sensor that is required when using preprinted forms that have the Top of Form registration marks printed on the opposite side from the side normally used by InfoPrint 4100 printers. This sensor is also used when printing on the same side of a page in both printers.

This section describes the following procedures to configure the printer to use the Dual Toner Mark/Side Verify sensor:

Refer to the Forms Design Reference for information about the location of the registration marks when using the Dual Toner Mark/Side Verify sensor.