Pre/Postprocessors panels

The Pre/Postprocessors tab provides the following task panels for defining pre- and postprocessors for your printer:

Pre/Postprocessing panel

Use the Pre/Postprocessing panel to define new pre- and postprocessors, edit the configuration settings, and delete pre- and postprocessors. See the Planning and Configuration Guide for more information about configuring the printer and pre- and postprocessors.

Select Printer Definition -> Pre/Postprocessing -> Pre/Postprocessing to display this panel.

This panel lists the pre- and postprocessors that are defined for the printer and shows their current status (either Enabled, Disabled, Enabling, or Disabling). Details for the selected device are shown on the right side of the panel.

Select New... to define new pre- and postprocessing devices. Select Edit... to change the settings for the selected device. Select Delete... to delete the selected device. Select Enable to enable the selected device, or select Disable to disable it.

Pre- and postprocessors can also be enabled using the Pre/Postprocessors panel (Frequent Tasks -> Pre/Postprocessors).

Note:
The printer must be stopped before changes can be made.

Note:
To see help information for the fields on this panel, select the field and press F1 on the keyboard or press and hold the left mouse button for two seconds. A help popup window displays detailed information about the selected field. Select the Help button to display a help topic for the panel. The help topic displays in a separate Help window inside a Help System viewer. Select the Alt+Tab key to toggle between the Help window and the operator console. Select the Alt+F4 key to close the Help window.
admin

Administrator panel

Postprocessing Options panel

Use the Postprocessing panel to configure options for postprocessors. See the Planning and Configuration Guide for more information about configuring postprocessors.

Select Printer Definition -> Postprocessing Options -> Postprocessing Options to display this panel.

Use this panel to specify the following postprocessing settings:

Note:
The printer must be stopped before changes can be made.

The following values specified on this panel are saved in Snapshots:

Note:
To see help information for the fields on this panel, select the field and press F1 on the keyboard or press and hold the left mouse button for two seconds. A help popup window displays detailed information about the selected field. Select the Help button to display a help topic for the panel. The help topic displays in a separate Help window inside a Help System viewer. Select the Alt+Tab key to toggle between the Help window and the operator console. Select the Alt+F4 key to close the Help window.
admin

Administrator panel

UP3i Devices panel

Use the UP3i Devices panel to configure UP3i postprocessors. See the Planning and Configuration Guide for more information about configuring the printer and pre and postprocessors.

Select Printer Definition -> Pre/Postprocessing -> UP3i Devices to display this panel.

Note:
To see help information for the fields on this panel, select the field and press F1 on the keyboard or press and hold the left mouse button for two seconds.

Administrator panel