About the printer control panel

The printer control panel is just below the transfer station. Table 3 describes the controls on the printer control panel.

Figure 12. Printer control panel
Infoprint 4100 printer control panel
Table 3. Printer control panel keys
Selecting This Control: Does This:
Auto Load Stop
Auto Load Stop
Stops the automatic forms-loading process.
Auto Load Key
Auto Load key
Starts the automatic forms-loading process.
Forms Set Up Fold
Forms Set Up Fold
This control is not active on InfoPrint 4100 Models HS3 and HD5/6.

On InfoPrint Models MS1, HS2, MD1/2, and HD3/4, this control indicates that the fold perforation on the alignment scale of the lower tractor is an up fold. If the indicator displays the opposite fold direction or no fold direction, press the appropriate key to change the setting.

Note:
Use this control only for fan-fold forms stacked at the printer stacker. If the control is not set correctly, the stacker jams.
Forms Set Down Fold
Forms Set Down Fold
This control is not active on InfoPrint 4100 Models HS3 and HD5/6.

On InfoPrint Models MS1, HS2, MD1/2, and HD3/4, this control indicates that the fold perforation on the alignment scale of the lower tractor is a down fold. If the indicator displays the opposite fold direction or no fold direction, press the appropriate key to change the setting.

Note:
Use this control only for fan-fold forms stacked at the printer stacker. If the control is not set correctly, the stacker jams.
Forms Feed Forward
Forms Feed Forward
Moves the forms toward the transfer station and forms exit area. Unfused forms in the forms path between the transfer station and the fuser are not fused.
Forms Feed Reverse
Forms Feed Reverse
Moves the forms away from the transfer station into the input bin. This control is active when the Tension Arm is in the correct position.
Toner Mark
Toner Mark
Allows you to reset errors that occur while aligning tractorless forms.