Backup and Recovery panel

Use the Backup and Recovery panel to create backup information on a USB flash memory device. The backup can be used to restore printer settings in the event of a hard drive failure. You can also selectively load configuration data from the backup USB flash memory device.

Select Maintenance -> Backup and Recovery to display this panel.

Select Create Backup... to copy printer configuration data to a USB flash memory device. Select Load Configuration to selectively load individual configuration items from the backup source rather than doing a full restore.

Note:
The printer must be stopped before this function can be performed.

Additional options to restore from backup and update microcode are available on this panel for service personnel.

Note:
To see help information for the fields on this panel, select the field and press F1 on the keyboard or press and hold the left mouse button for two seconds. A help popup window displays detailed information about the selected field. Select the Help button to display a help topic for the panel. The help topic displays in a separate Help window inside a Help System viewer. Select the Alt+Tab key to toggle between the Help window and the operator console. Select the Alt+F4 key to close the Help window.
admin

Administrator panel