About the developer

The standard developer for InfoPrint 4100 model printers is a customer changeable developer.

Figure 9. Customer changeable developer
customer changeable developer for the Infoprint 4100

Developer mix for InfoPrint 4100 printers is provided in bottles. You add developer mix to the printer through the developer mix inlet (1) in the developer area. The developer run push button (3), marked with an R label, causes new developer mix to move from the developer mix inlet into the developer. The developer drain lever (2), marked with a D label, opens and closes the developer drain.

Toner for InfoPrint 4100 models is provided in cartridges. You add toner to the printer through the toner hopper (4) in the developer area.

Table 2 describes the controls on the customer changeable developer.

Table 2. Developer controls
Selecting This Control: Does This:
Developer Mix Inlet (1) Adds developer mix to the developer.
Developer Drain Lever (2)
developer drain lever
Starts the developer mix drain process to move developer mix from the developer into an external container for disposal.
Developer Run Push Button (3)
developer run push button
Starts the developer mix load process to move developer mix from the developer inlet into the developer.
Toner Hopper (4) Add toner through the toner hopper.
Figure 10. Developer controls on the customer changeable developer
developer controls on the customer changeable developer