Figures

  1. Forms path through an InfoPrint 4100 printer engine
  2. Control unit area
  3. USB flash memory device
  4. Power control panel
  5. Printer operator panel
  6. Display area of the printer operator panel
  7. Function keys on the printer operator panel
  8. Indicators on the printer operator panel
  9. Customer changeable developer
  10. Developer controls on the customer changeable developer
  11. Forms input area and transfer station area
  12. Printer control panel
  13. Splicing table
  14. Transfer station control lever and tractor control knob
  15. Vacuum, stack height, and puller controls
  16. Fuser entry area
  17. Forms exit area on InfoPrint Models HS3 and HD5/6
  18. Forms exit area with stacker on InfoPrint Models MS1, HS2, MD1/2, and HD3/4
  19. Stacker control panel on InfoPrint 4100 Models HS3 and HD5/6
  20. Stacker control panel on InfoPrint Models MS1, HS2, MD1/2, and HD3/4
  21. Rear service area
  22. Power control panel
  23. Main touch panel on the operator console
  24. Align Forms panel
  25. Location of tabs, buttons, and areas on the Main touch panel
  26. User controls on the touch panel
  27. On-screen-display menu
  28. Location of the printer system information label
  29. Power control panel
  30. Cancel Current Job panel
  31. Volume Control knob on the operator alert assembly
  32. Printer usage meter
  33. Printer Usage Sheet
  34. Snapshots panel
  35. Sort/Search table
  36. Tractored paper path for fan-fold and roll-feed forms
  37. Tractorless paper path for roll-feed forms
  38. Form Settings panel
  39. Forms Feed button
  40. Form Settings panel
  41. Forms Feed button
  42. Form Settings panel
  43. Forms Feed button
  44. Form Settings panel
  45. Forms Feed button
  46. Example of good print registration
  47. Example of poor print registration
  48. Print Registration panel
  49. Auto Load - Load key on the printer control panel
  50. Forms Feed Forward key on the printer control panel
  51. Forms Set key on the printer control panel
  52. Forms Feed button on the InfoPrint 4100 printer
  53. Form Settings panel
  54. Tractor covers
  55. Splicing table
  56. Tension gate
  57. Splicing table
  58. Align Forms panel
  59. Align Forms panel
  60. Align Forms panel
  61. Align Forms panel
  62. Straight-line (inline) configuration using the Tall Buffer/Flipper and the Air Bearing Buffer/Flipper
  63. Straight-line (inline) configuration using the Tall Buffer/Flipper
  64. Threading the Tall Buffer/Flipper for an inline configuration
  65. Threading the Air Bearing Buffer/Flipper for an inline configuration
  66. Left-angle configuration using the Tall Buffer/Flipper
  67. Threading the Tall Buffer/Flipper for a left-angle configuration
  68. H configuration using the Tall Buffer/Flipper and a turnbar
  69. Threading the Tall Buffer/Flipper for an H configuration
  70. Example of good print registration
  71. Example of poor print registration
  72. Print Registration panel
  73. Front Facing panel
  74. Forms fold at the alignment guide
  75. Forms alignment
  76. Forms Set indicator on the printer control panel
  77. Alternate Print Sample
  78. Size and placement of side verify marks
  79. Size and placement of registration marks
  80. Placement of registration marks for tractorless forms
  81. Warning messages
  82. Intervention messages with recovery directions
  83. Intervention messages with troubleshooting actions
  84. Example of hard program check window
  85. Reestablishing forms alignment
  86. Duplex mode reprint path length
  87. Corona locations
  88. Preclean, precharge, and charge corona locations
  89. Toner Mark/Side Verify sensor on InfoPrint Models HS3 and HD5/6
  90. Toner Mark/Side Verify sensor on InfoPrint Models HS2 and HD3/4
  91. Skew sensor
  92. Feed loop sensors
  93. Upper tractor jam sensor
  94. Stacker jam sensors
  95. Fuser oil bottle and plastic spout
  96. Oiler belt
  97. Charge corona assembly
  98. Precharge, preclean, and transfer corona assemblies
  99. Corona cartridge
  100. Corona cartridge, corona wire, and corona wire ring
  101. Preclean, precharge, and charge corona locations
  102. Main touch panel on the operator console
  103. Location of tabs, buttons, and areas on the Main touch panel
  104. Size and placement of side verify marks
  105. Size and placement of registration marks
  106. Two printer engines in Duplex mode
  107. Mark forms pattern using Move Mark Forms feature
  108. Paper path using the Signature Page feature
  109. Form Settings panel
  110. Cleaning the forms bar code sensor