Previous Page | Next Page Contents Glossary Index Working with forms >

Adjusting the lower tension arm spring for the Infoprint 4100

Note:
The tension arm spring hardware is present only if the Infoprint Forms Management Feature is installed.

Use the lower tension spring to reduce tension on very lightweight forms that otherwise might tear or become deformed.

Figure 68. Lower tension arm spring for the Infoprint 4100
Lower tension arm spring for the Infoprint 4100

Figure 68 shows the location of the lower tension arm bracket (1) and the adjustment knob (2) on Infoprint 4100 Models HD1/HD2. The adjustment knob increases tension on the form, allowing consistent paper to drum contact. This prevents the forms from wrinkling and becoming skewed.

The closer the tension arm is to vertical, the higher the tension on the paper. The recommendation is 60° from horizontal.