Previous Page | Next Page Contents Glossary Index Operating the printer > Switching printer modes (dual simplex/duplex) and printer speed >

Switching printer speeds

  1. Select Stop on the touchscreen to stop the printer.
  2. Select Printer Definition -> Printer -> Basic.
  3. Select High or Low for Printer Speed.
  4. Select OK.
Note:
The internal stacker on the Infoprint 4100 Models HS2 in simplex mode and the HD3/4 in dual simplex mode can only be used when the printer is set to low speed. To enable or disable the internal stacker, see Enabling and disabling pre/postprocessors