Previous Page | Next Page Contents Glossary Index Operating the printer > Shutting down and restarting the system >

Shutting down the system

Note:
In duplex mode, this procedure shuts down the complete system (both printers). In dual simplex mode, this procedure shuts down only the target printer. The other printer remains active and usable. If you are shutting down the last active dual simplex printer, the complete system is shutdown.

Note that once a dual simplex printer has been shutdown using this procedure, the only way to get it back to active use is to first shutdown the other dual simplex printer also.

  1. On the touchscreen, select Shutdown.
  2. Select Shutdown.

    If you decide that you do not want to shutdown or restart the system, select Cancel.

    If the printers are in duplex mode, or if the printers are in dual simplex mode and the final simplex printer is being shutdown, the following messages appear:

  3. If necessary, switch power off to the system or to the individual printer. See Controlling the system power for details.

    As required, correct the problem that caused you to initiate the procedure.