Previous Page | Next Page Contents Glossary Index Introducing the printer > Functional areas >

About the printer control panel

The printer control panel is just below the transfer station. Table Printer control panel keys describes its controls.

Figure 12. Infoprint 4000 printer control panel
Infoprint 4000 printer control panel
Figure 13. Infoprint 4100 printer control panel
Infoprint 4100 printer control panel
Table 3. Printer control panel keys
Using This Control: Does This:
Auto Load Key

r4co0107

Starts the automatic forms-loading process.
Auto Load Stop

r4co0108
Stops the automatic forms-loading process.
Forms Set Up Fold

r4co0103

Indicates that the fold perforation on the alignment scale of the lower tractor is an up fold. If the indicator displays the opposite fold direction or no fold direction, press the appropriate key to change the setting.
Note:
Use this control only for fan-fold forms stacked at the printer stacker. If the control is not set correctly, the stacker jams.
Forms Set Down Fold

r4co0102
Indicates that the fold perforation on the alignment scale of the lower tractor is a down fold. If the indicator displays the opposite fold direction or no fold direction, press the appropriate key to change the setting.
Note:
This control is used only for fan-fold forms stacked at the printer stacker. If the control is not set correctly, the stacker jams.
Forms Feed Forward

r4co0100

Moves the forms toward the transfer station and stacker area. Unfused forms in the forms path between the transfer station and the fuser are not fused.
Forms Feed Reverse

r4co0101
Moves the forms away from the transfer station into the input bin. This control is active when the Tension Arm is in the correct position.
Toner Mark

ic3u0031
Allows you to reset errors that occur during tractorless forms alignment on the Infoprint 4100.

The Forms Select values and the Contrast values display the values you set at the touchscreen.

Note:
On the Infoprint 4000, do not use the printer control panel to change values because you will override values you set on the touchscreen.