Previous Page | Next Page Contents Glossary Index Using the Display/Touch Screen > Menu Summary >

Configure Pull-Down Menu

Figure 7 shows the selections available on the Configure pull-down menu.

Note:
If the printer is not stopped, some items are "grayed out or the proper authority level has not been invoked."
Figure 7. Configure Pull-Down Menu
This is an image that illustrates the selections available on the Configure pull-down menu.
Define Forms...
Lets you change, add, and delete form definitions. You must define a form before you can assign and load it on a printer. See Defining Forms for more information.
Configure Printer...
Lets you display, update, or print out a copy of the printer configuration. See Configuring the Printer for more information.
Configure Attachments...
Lets you display, update, or print the configuration settings of all installed attachments. See Configuring Host Attachments for more information.
Configure Pre/Post...
Lets you add, delete, or change the specifications of preprocessing or postprocessing device interfaces. See Configuring Preprocessing/Postprocessing Devices/Interfaces for more information.
Adjust Print...
Shifts the logical page on a form when you are using preprinted forms or other forms that require precise alignment. See Adjusting the Print Position for more information.
Remote Access...
Lets you enable and configure remote access to the printer via Simple Network Management Protocol (SNMP), Remote Management Interface (RMI), and Modem. See Configuring Remote Access for more information.