Previous Page | Next Page Contents Glossary Index Introducing the Infoprint 3000 > Functional Areas >

Transfer Station Control Lever and Tractor Control Levers

The transfer station control lever and the tractor control knob are on the transfer station frame.

This is an image that illustrates the transfer station control lever and the tractor control levers.
Using This Control: Does This:
Transfer Station Control Lever

1

 Releases the transfer station latch and opens the transfer station.

To open the transfer station, you move the lever to the left and lift the transfer station in a counterclockwise direction.

To close the transfer station, you lower the transfer station in a clockwise direction. You then move the lever to the left and press down on the transfer station to latch it in place.

During printing, the transfer station should be firmly latched in the closed position.
Tractor Control Levers

2

 Allow you to change the distance between the front and rear tractors. When you move the levers to the left, the tractors are free to move forward or backward to the required form width. Release the lever when you have reached the correct distance.

A scale to the right of the tractors allows you to preset the tractors to the closest approximate setting before you load the forms.