Previous Page | Next Page Contents Glossary Index Appendix B. Physical System Layouts >

Duplex Models

The dimensions of the Infoprint 3000 duplex printers, and the Buffer/Flipper Unit (1), the optimum separation of the units, the service clearance around the allowable configurations of these units, and the power cable and channel cable locations are shown in Figure 44, Figure 45, and Figure 46.

Note:
The minimum size for Channel Cable Access opening is 200 x 200 mm (8 x 8 in.).
Figure 44. Duplex Inline Configuration
This is an image that illustrates duplex inline configuration.
Figure 45. Duplex Left Angle Configuration
This is an image that illustrates duplex left angle configuration.

For the 'h' configuration, in which the printers are parallel, the IBM-supplied Buffer/Flipper Unit is placed next to Printer 1. The turnbar/flipper device supplied by your company is placed next to Printer 2.

Figure 46. Duplex 'h' Configuration (Both Printers Facing the Same Direction)
This is an image that illustrates duplex hconfiguration.