Previous Page | Next Page Contents Glossary Index Configuring the System > Defining Forms >

Setting/Adjusting the Hot Roll Temperature

The Hot Roll selection in the Forms Characteristics box allows you to adjust the temperature of the hot roll for optimum fusing. The number you enter is a relative number, not a temperature measurement in degrees. A default value is set during printer configuration. This default value is used if you enter 0 (zero) or leave the field blank.

This is an image that illustrates how to start setting the hot roll temperature

To set or change the hot roll temperature, do the following:

  1. SELECT the Hot Roll field. A keypad window appears.
    This is an image that illustrates how to enter a number between 1 and 100 for hot roll temperature
  2. Enter a number between 1 and 100 where 1 is for the coolest temperature and 100 is for the hottest temperature.
    Note:
    The number you enter is not a temperature measurement in degrees.
  3. or
  4. To use the default temperature value, enter 0 (zero) on the keypad. To determine the default value, look at Hot Roll in Printer Configuration.
  5. SELECT the OK push-button on the keypad.
  6. When you finish making all changes to forms, SELECT the OK push-button on the Define Forms window.