Previous Page | Next Page Contents Glossary Index Configuring the System > Defining Forms >

Setting/Adjusting the Contrast

The Contrast selection in the Forms Characteristics box allows you to adjust toner density (darkness) of the print on the form. You can increase (darken) or decrease (lighten) the toner density of the print. A default value is set during printer configuration. This default value is used if you enter 0 (zero) or leave the field blank.

This is an image that illustrates how to start setting the contrast

To set or change the contrast, do the following:

  1. SELECT the Contrast field. A keypad window appears.
    This is an image that illustrates how to enter a number between 1 and 7 for contrast
  2. Enter a number between 1 and 7 where 1 is lightest and 7 is darkest.
  3. or
  4. To use the default contrast value, enter 0 (zero) on the keypad. To determine the default value, look at Contrast in Printer Configuration.
  5. SELECT the OK push-button on the keypad.
  6. When you finish making all changes to forms, SELECT the OK push-button on the Define Forms window.