Previous Page | Next Page Contents Glossary Index Configuring the System > Configuration Work Sheets >

Simplex Configuration Work Sheet

Table 30. Configuration Work Sheet - Simplex Model
Item Available Values Selected Value
MESSAGE DISPLAY LANGUAGE:
  • US English
  • Spanish
  • French
  • German
  • Japanese
  • Italian
  • Brazilian Portuguese
  • Chinese Simplified
  • Chinese Traditional
CONFIGURE PRINTER:
Auto Start Yes / No  
PQE boldness 100% This value must not be changed.
Printer Counter (CE Change Only) 0 to 2 000 000 000 N/A
Printhead resolution (not all values are supported on all printers)
  • 480 DPI
  • 600 DPI
  • 480/600 DPI
 
IPDS Resolution
  • Automatic
  • 240 DPI
  • 300 DPI
  • 600 DPI
 
Font Enhancement
  • Single Byte: Yes / No
  • Double Byte: Yes / No
 
Jam Recovery Type
  • Use Normal Jam Repositioning
  • Suppress MICR Jam Repositioning
  • Suppress All Jam Repositioning
 
Font Usage Low / Medium / High  
Page Segment Usage Low / Medium / High
Overlay Usage Low / Medium / High
Overlay Cache Yes / No
Input Buffer Size Low / Medium / High
Output Buffer Size Low / Medium / High
Direct Attach Yes / No  
NPRO Length 0 to 1200 inches  
Auto NPRO at EOF Yes / No  
Line mode enabled (In 480 DPI mode only) Yes / No
Jam Recovery Point Distance 0 to 500 inches  
Logical Page Increment 0 to 20 pels
Clear Memory for Security Yes / No  
Screen Saver Timeout 0 to 60 minutes  
Alarm Suppression Yes / No  
Fuser Inactivity Timer 0 to 9 hours  
Eject to Front Facing Yes / No  
Form definition order Yes / No  
Stacker Enabled Yes / No  
Cut sheet emulation
  • None
  • Normal Left-to-Right
  • Normal Right-to-Left
  • Inverted Left-to-Right
  • Inverted Right-to-Left
 
BTS Installed Yes / No  
BTS Enabled Yes / No  
Offsetter Installed Yes / No  
Offsetter Enabled Yes / No  
Offset on Mark Forms Yes / No  
3130 Bar Code Compatibility Yes / No  
Contrast (CE Change Only) 1 to 7 N/A
Preheat (Platen Temperature) (CE Change Only) 1 to 100 N/A
Hot Roll (Temperature) (CE Change Only) 1 to 100 N/A
Oil Rate (CE Change Only) 1 to 100 N/A
Oil Belt (Speed) (CE Change Only) 1 to 100 N/A
Scan Factory Adjust (CE Change Only) N/A
Process Factory Adjust (CE Change Only) N/A
Beam 1 Offset (CE Change Only) 0.0 to 15.9 N/A
Beam 2 Offset (CE Change Only) 0.0 to 15.9 N/A
Beam 3 Offset (CE Change Only) 0.0 to 15.9 N/A
Beam 4 Offset (CE Change Only) 0.0 to 15.9 N/A
Beam 5 Offset (CE Change Only) 0.0 to 15.9 N/A
Machine Sequence (CE Change Only) N/A
Manufacturing Plant (CE Change Only) N/A
Date and Time (CE Change Only) N/A
HOST ATTACHMENTS CONFIGURATION:
Parallel Channel:
Parallel Link A Installed Yes / No  
Parallel Link B Installed Yes / No  
Device Address 00 to FF (hexadecimal)
Second Channel Static / Dynamic  
Data Transfer Protocol Interlocked / Data Streaming  
Data Streaming Rate 3.0 / 4.5MB /sec  
Card 1 Slot Position 2 / 4 / Not Installed Automatically set at power on, cannot be changed.
Card 2 Slot Position 2 / 4 / Not Installed Automatically set at power on, cannot be changed.
ESCON Channel:
ESCON Link A Installed Yes / No  
ESCON Link B Installed Yes / No  
Device Address 00 to FF (Hexadecimal)  
Multi-host Environmental Flag True / False
Card 1 Slot Position 2 / 4 / Not Installed Automatically set at power on, cannot be changed.
Card 2 Slot Position 2 / 4 / Not Installed Automatically set at power on, cannot be changed.
Token Ring TCP/IP Configuration:
Installed Yes / No  
TCP Port 5001 to 65536  
IP Address X.X.X.X where X <= 255
Subnet Mask X.X.X.X where X <= 255
Default Gateway Address X.X.X.X where X <= 255  
MTU Size 60 to 4096
Hardware address Cannot be changed  
Alternate address X'0' to X'FFFFFFFFFFFF'  
Ring Speed 4 or 16  
Confine Broadcast Yes / No  
Ethernet TCP/IP Configuration:
Installed Yes / No  
TCP Port 5001 to 65536  
IP Address X.X.X.X where X <= 255   
Subnet Mask X.X.X.X where X <= 255  
Default Gateway Address X.X.X.X where X <= 255  
Standard MTU Size 60 to 1500
IEEE8023 MTU Size 60 to 1492  
Ethernet Type Standard or IEEE8023  
Hardware address Cannot be changed  
Alternate address X'0' to X'FFFFFFFFFFFF'  
Media Speed
  • Auto Negotiation
  • 100BaseT - Full Duplex
  • 100BaseT - Half Duplex
  • 10BaseT - Full Duplex
  • 10BaseT - Half Duplex
PREPROCESSING/POSTPROCESSING INTERFACE CONFIGURATIONS:
DEVICE Number__________
Port Number 1 / 2 / 3  
Enabled Yes / No  
Name 1 to 12 alphanumeric characters (including spaces)
Type
  • Coupled Preprocessor
  • Coupled Postprocessor
  • Advanced Postprocessor - MICR
  • Advanced Postprocessor - SMM (Select Medium Modification)
Characteristics:
Pre/Postprocessor Extended NPRO: 0 to 800 inches  
Pre/Postprocessor Busy Timer: 1 to 999 seconds  
Postprocessor Tag Type:
  • Coupled
  • RSI Compatible
 
Distance to Postprocessor
  • 24 to 800 inches
  • 24 to 1200 inches
 
Postprocessor Error Page Stop 0 to 50 pages  
Postprocessor Verify Alignment Page Stop 0 to 5000 pages  
Pre/Postprocessor Baud Rate in Kbps 19.2 or 62.5  
DEVICE Number__________
Port Number 1 / 2 / 3  
Enabled Yes / No  
Name 1 to 12 alphanumeric characters (including spaces)  
Type
  • Coupled Preprocessor
  • Coupled Postprocessor
  • Advanced Postprocessor - MICR
  • Advanced Postprocessor - SMM (Select Medium Modification)
 
Characteristics:
Pre/Postprocessor Extended NPRO: 0 to 800 inches  
Pre/Postprocessor Busy Timer: 1 to 999 seconds  
Postprocessor Tag Type:
  • Coupled
  • RSI Compatible
  • Advanced
 
Distance to Postprocessor
  • 24 to 800 inches
  • 24 to 1200 inches
 
Postprocessor Error Page Stop 0 to 50 pages  
Postprocessor Verify Alignment Page Stop 0 to 5000 pages  
Pre/Postprocessor Baud Rate in Kbps 19.2 or 62.5  
DEVICE Number__________
Port Number 1 / 2 / 3  
Enabled Yes / No  
Name 1 to 12 alphanumeric characters (including spaces)  
Type
  • Coupled Preprocessor
  • Coupled Postprocessor
  • Advanced Postprocessor - MICR
  • Advanced Postprocessor - SMM (Select Medium Modification)
 
Characteristics:
Pre/Postprocessor Extended NPRO: 0 to 800 inches  
Pre/Postprocessor Busy Timer: 1 to 999 seconds  
Postprocessor Tag Type:
  • Coupled
  • RSI Compatible
Distance to Postprocessor
  • 24 to 800 inches
  • 24 to 1200 inches
 
Postprocessor Error Page Stop 0 to 50 pages  
Postprocessor Verify Alignment Page Stop 0 to 5000 pages  
Pre/Postprocessor Baud Rate in Kbps 19.2 or 62.5  
DEVICE Number__________
Port Number 1 / 2 / 3  
Enabled Yes / No  
Name 1 to 12 alphanumeric characters (including spaces)  
Type
  • Coupled Preprocessor
  • Coupled Postprocessor
  • Advanced Postprocessor - MICR
  • Advanced Postprocessor - SMM (Select Medium Modification)
 
Characteristics:
Pre/Postprocessor Extended NPRO: 0 to 800 inches  
Pre/Postprocessor Busy Timer: 1 to 999 seconds  
Postprocessor Tag Type:
  • Coupled
  • RSI Compatible
 
Distance to Postprocessor
  • 24 to 800 inches
  • 24 to 1200 inches
 
Postprocessor Error Page Stop 0 to 50 pages  
Postprocessor Verify Alignment Page Stop 0 to 5000 pages  
Pre/Postprocessor Baud Rate in Kbps 19.2 or 62.5