Previous Page | Next Page Contents Glossary Index Taking Care of Problems >

Running Traces

The Traces procedure lets you select, start, stop, and print traces.

Note

  1. SELECT the Analyze pull-down menu on the main Display/Touch Screen window.
  2. SELECT the Traces procedure. The Traces window appears with a list of the available traces and the current status of each.
  3. To start a trace:
    1. SELECT the trace you want to run from the Select a Trace box.
    2. SELECT the Start Trace push-button.
  4. To stop a trace:
    1. SELECT the trace you want to stop from the Select a Trace box.
    2. SELECT the Stop Trace push-button.
  5. To save trace data:
    1. Stop all traces.
    2. SELECT the Save push-button.
    3. Insert a diskette in the diskette drive, and SELECT Save on the verification window that appears.
  6. To print a trace:
    1. You must stop the trace before you can print it. Do step 4.
    2. Disable all host attachments before you print a trace. See Enabling and Disabling Attachments for details.
    3. SELECT the Print... push-button on the Traces window. You see the Print Trace window.
    4. SELECT the trace you want to print from the Select a Print File box.
    5. To change the number of copies you print, do the following:
      1. SELECT the How Many? field.
      2. Type the number of copies you want to print.
      3. SELECT the OK push-button.
    6. SELECT the Print push-button on the Print Trace window.