Notes:
-
The maximum paper weight for duplex printers running in simplex
mode should be 160 g/m2 (42 lb).
- The maximum print width is 432 mm (17 in.).
- Forms that are less than 178 mm (7 in.) in length are folded in multiples
of 7 in. or greater (that is, forms that are 3.5 in. are folded every 7 in.;
forms that are 3 in. are folded every 9 in.). For more information about forms
lengths, see "Forms Length and Width Controls" in Chapter 3 and Appendix
A "Valid Form Length in Inches" in the Infoprint 3000 Operator's
Guide.
-
Maximum form length is 356 ±0.3 mm (14 ±0.013
in.) when used with the on-board stacker.
-
Maximum form length is 711 ±0.3 mm (28 ±0.013
in.) when used with preprocessing and postprocessing devices.
To use forms
longer than 711 mm (17 in.), the forms length must be enabled under the Special
Features option of the Options pull-down menu. Be aware that when longer forms
are in use, there can be an impact on performance, especially on more complex
printing jobs that can result in printer back-hitching. Additional memory
can help minimize this impact. When longer forms are no longer in use, the
feature should be disabled for more efficient printer operation. For more
information, see Appendix C "Special Features" in the Infoprint 3000
Operator's Guide.
|